The Young Shin EZ Feeder automatic feeding device is made specifically for use with Giant Models 130, 150, 170, 180, 210 and 250 diecutters. Reducing operator time substantially, the EZ Feeder automatically feeds the material into the diecutter one sheet at a time. Strong vacuum suckers perform sheet separation and feeding while the unit’s warped sheet device presses the edges of a warped sheet down for even feeding to the front lay assembly. Upon air adjustment, the sheets become separated while the air cylinder jogging units keep the sheets arrayed at the rear and the sides for enhanced feeding. The electronics on the EZ Feeder alert the operator when it reaches empty or when other attention is required to perform the continuous and exacting feeding of the sheets. The Young Shin EZ Feeder is a time-savings device that provides a rapid return on investment.
|Specs Based Upon Giant 210(S)
|Maximum Sheet Size
|2100 × 1500 mm
|Minimum Sheet Size
|1100 x 850 mm
|1.5 ~ 11 mm
|380V, 50Hz, 3-P
|4C × 22 ㎟
|5 ~ 6 Kgt/㎠
|Air Internal Diameter
Strong vacuum suckers and air separators ensure precise feeding.
WARPED SHEET GUIDE AND FRONT LAY DEVICE
Warped sheet device presses down sheet edge for even feeding into front lay assembly.
SHEET SEPARATING BLOWERS
Adjustable air pressure and position separates sheets.
Air cylinder jogging units keep sheets arrayed at rear and sides for enhanced feeding.
Powered by chain transferring device and constant timing by clutch.
Displays status of machine at all times for quick diagnosis.
EZ FEEDER CONTROL PANEL
Controls all electrical components related to the optional EZ Feeder, if installed.
EZ FEEDER MAIN OPERATION BOX
Controls the function of the EZ Feeder’s vacuum pump and feeder head movements and engages the feed drive.